Γαλλική σκόνη οξειδίου ψευδαργύρου
Zinc stearate is a white light powder with a slippery feel, insoluble in water, soluble in hot ethanol and other organic solvents. It is an environmentally friendly heat stabilizer for the processing of plastic raw materials, plastic masterbatches, engineering plastics, and rubber compounds. Lubricant. Γαλλική σκόνη οξειδίου ψευδαργύρου has high whiteness, high purity and moderate activity, making it more suitable for the production of zinc stearate.
Ονομασία προϊόντος |
Οξείδιο του ψευδαργύρου |
Μοριακός τύπος |
ZnO |
CAS ΟΧΙ |
1314-13-2 |
EINECS ΟΧΙ |
215-222-5 |
Πυκνότητα |
5,606 g / cm3 |
Μοριακό βάρος |
81.38 |
Σημείο τήξης |
1975â „ƒ |
Σημείο βρασμού: |
2360ºC |
Καθαρότητα |
0.99 |
Περιεχόμενο δραστικής ουσίας |
0.997 |
ΚΩΔΙΚΟΣ Η.Σ. |
2817001000 |
Εμφάνιση |
Λευκή σκόνη ή κρύσταλλο |
The influence of the basic indexes of Γαλλική σκόνη οξειδίου ψευδαργύρου on the production of zinc stearate:
1) Whiteness: There are many factors influencing the color of zinc stearate. Among them, the whiteness of Γαλλική σκόνη οξειδίου ψευδαργύρου is very important. The higher the whiteness of zinc oxide, the color of zinc stearate produced the more white.
2) Other metal content: The content of other metals contained in Γαλλική σκόνη οξειδίου ψευδαργύρου will directly affect the free acid index, transparency, and insoluble matter of zinc stearate. Therefore, the content of other metals in Γαλλική σκόνη οξειδίου ψευδαργύρου used in the production of zinc stearate is required to be less than 20PPM.
3) Zinc content: Zinc content will affect the free acid index of zinc stearate, and Γαλλική σκόνη οξειδίου ψευδαργύρου with too low zinc content will increase the cost of producing zinc stearate.
4) Activity: The activity of Γαλλική σκόνη οξειδίου ψευδαργύρου will affect the production rate of zinc stearate. Too low activity will lead to slow reaction, long heating time, poor efficiency and yellowish color. Excessive activity will cause a violent reaction, which is difficult to control.
5) Fineness: The fineness of Γαλλική σκόνη οξειδίου ψευδαργύρου has an effect on the reaction of zinc stearate. The finer the fineness, the faster the reaction speed, and vice versa. The fineness should be in an appropriate range, too fast to react. Control, too slow cost increase.
Πρότυπο: ã € ŠGB / T3185-2016ã € ‹ |
|
|
|
Είδος |
Τύπος1 |
Τύπος2 |
Τύπος3 |
Οξείδιο του ψευδαργύρου (Zn0 που υπολογίζεται ως ξηρό υλικό)% â ‰ ¥ |
99.7 |
99.7 |
99.5 |
Περιεχόμενο μετάλλου ( ως Zn)% â ‰ ¤ |
κανένας |
κανένας |
0.008 |
Αδιάλυτο θέμα σε Hci% â ‰ ¤ |
0.006 |
0.008 |
0.03 |
Απώλεια%% ‰ ¤ |
0.2 |
0.2 |
0.25 |
Κατάλοιπα στο κόσκινο (45um)% â ‰ ¤ |
0.1 |
0.15 |
0.2 |
Υδατοδιαλυτή ουσία% â ‰ ¤ |
0.1 |
0.1 |
0.15 |
Πτητική ύλη σε 105â „ƒ% â ‰ ¤ |
0.3 |
0.4 |
0.5 |
Μόλυβδος (pbï¼ ‰% â ‰ ¤ |
0.008 |
0.05 |
0.1 |
Χαλκός (Cu)% â ‰ ¤ |
0.0002 |
0.0004 |
0.0007 |
Μαγγάνιοese Mnï¼ ‰% |
0.0001 |
0.0001 |
0.0003 |
Κάδμιο (Cdï¼ ‰% |
0.002 |
0.005 |
0.01 |
Σίδερο (Feï¼ ‰% |
0.005 |
0.01 |
— |
Τα πλεονεκτήματα του στεατικού ψευδαργύρου ανακαλύπτονται συνεχώς από τους ανθρώπους, οπότε η εφαρμογή του γαλλικού οξειδίου του ψευδαργύρου στη βιομηχανία στεατικού ψευδαργύρου θα βελτιωθεί επίσης πολύ.
Η γαλλική μέθοδος οξείδιο ψευδαργύρου έχει τα χαρακτηριστικά υψηλής καθαρότητας, υψηλής λευκότητας, μέτριας δραστικότητας και καλής σταθερότητας, η οποία είναι πολύ κατάλληλη για την παραγωγή στεατικού ψευδαργύρου.